简体中文
English
Spanish
Product 
Technical parameters:
1. Operating environment: temperature 0-400C, relative humidity: ≤90%RH, power supply: 220V/50Hz, continuous operation.
2. Water storage tank, 500×400×400mm, material PVC board.
3. Measuring water tank: volume 6L, made of transparent organic glass, with measuring scale.
4. Experimental flow rate: 0~200ml/s, piston diameter φ12mm.
5. Experimental water tank: volume 40L, made of organic glass, equipped with automatic feedback, piston-type flat plate force measuring device, the angle between the incident and the outflow direction is 90°.
6. Silent and environmentally friendly water pump: head: 10m, rated flow: 12L/min, power: 90W.
7. The fluid used in the experiment-water is a full-circulation design to fully save water resources.
8. The frame and table are made of 304 st*nless steel, with compact structure, beautiful appearance and easy operation.
9. Dimensions: 1500×500×1600mm (length×width×height), the frame is a movable design with casters and locking feet.
Experimental purpose:
1. Suitable for teaching experiments in engineering fluid mechanics (hydraulics).
2. Determine the impact force exerted on the baffle by the nozzle jet.
3. Determine the momentum correction coefficient to experimentally analyze the correlation between the jet exit angle and the momentum force
4. Compare the measured flat plate impact force with the impact force calculated by the momentum equation to deepen the understanding of the momentum equation.
5. Virtual simulation software for electrical installation of building buildings and intelligent buildings Based on unity3d design, users can choose different sizes of interactive interfaces according to their computer configurations, and can choose six levels of image quality. The model in the software can be rotated 360°, enlarged, reduced, and translated. There are assistant prompts during the use of the software, the contents are as follows: A. Wet alarm system 1. System overview: Overview of wet alarm system 2. Equipment recognition: It is equipped with the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), exercises (built-in 6 multiple-choice questions, with prompts for correct and wrong choices), and schematic diagrams (you can enter the equipment from the schematic diagram). The equipment includes: sprinklers, water flow indicators, signal butterfly valves, exhaust valves, fire alarm controls, high-pressure gauges, high-level water tanks, Wia control cabinets, pressure-stabilizing tanks, flow switches, terminal water testing devices, dr*nage facilities, water pump connectors, hydraulic alarms, time delays, wet alarms, butterfly valves, check valves, fire pumps, safety pressure-stabilizing valves, and fire water tanks. 3. Principle display: Display the working principle of the wet alarm system, 3D animation demonstration, and semi-transparent 3D models, so that the internal water flow can be seen. Equipped with practice module (built-in 4 multiple-choice questions, with prompts for correct and wrong choices) 4. Design layout: There are multiple-choice questions and calculation questions, each of which is scored, and the correct answer and score will be displayed after submission B. Gas fire extinguishing system 1. System overview: Overview of gas fire extinguishing system 2. Equipment cognition: It is equipped with the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), practice (built-in 8 multiple-choice questions, with prompts for correct and wrong choices), schematic diagram (you can enter the equipment from the schematic diagram). The equipment includes: nozzle, HFC-227 storage bottle, bottle head valve, heptafluoropropane check valve, high-pressure hose, gas check valve, safety valve, weighing alarm, electromagnetic starter, selection valve, smoke alarm, fire alarm controller. 3. Principle display: Display the working principle of the gas fire extinguishing system, 3D animation demonstration, 3D model is semi-transparent, and the internal gas can be seen. Equipped with practice module (built-in 3 multiple-choice questions, with prompts for correct and wrong choices) 4. Design layout: There are 6 multiple-choice questions, each with scores, and the correct answer and score will be displayed after submission C. Escape drill: Teaching in the form of fun games, escaping from the burning room within a limited time, and wrong choices will directly enter the score interface M*n configuration: water pump, flow meter, experimental water tank, water storage tank, metering water tank, jet dynamometer, nozzle, scale ruler, stopwatch, experimental pipeline, valve, self-circulation device, st*nless steel frame.
欢迎咨询ylHGLT-22 Momentum Law Training Device相关问题,我们是源头工厂，有标准工业厂房生产基地，欢迎前来考察，如有ylHGLT-22 Momentum Law Training Device其他问题，可联系19957812178
1. Operating environment: temperature 0-400C, relative humidity: ≤90%RH, power supply: 220V/50Hz, continuous operation.
2. Water storage tank, 500×400×400mm, material PVC board.
3. Measuring water tank: volume 6L, made of transparent organic glass, with measuring scale.
4. Experimental flow rate: 0~200ml/s, piston diameter φ12mm.
5. Experimental water tank: volume 40L, made of organic glass, equipped with automatic feedback, piston-type flat plate force measuring device, the angle between the incident and the outflow direction is 90°.
6. Silent and environmentally friendly water pump: head: 10m, rated flow: 12L/min, power: 90W.
7. The fluid used in the experiment-water is a full-circulation design to fully save water resources.
8. The frame and table are made of 304 st*nless steel, with compact structure, beautiful appearance and easy operation.
9. Dimensions: 1500×500×1600mm (length×width×height), the frame is a movable design with casters and locking feet.
Experimental purpose:
1. Suitable for teaching experiments in engineering fluid mechanics (hydraulics).
2. Determine the impact force exerted on the baffle by the nozzle jet.
3. Determine the momentum correction coefficient to experimentally analyze the correlation between the jet exit angle and the momentum force
4. Compare the measured flat plate impact force with the impact force calculated by the momentum equation to deepen the understanding of the momentum equation.
5. Virtual simulation software for electrical installation of building buildings and intelligent buildings Based on unity3d design, users can choose different sizes of interactive interfaces according to their computer configurations, and can choose six levels of image quality. The model in the software can be rotated 360°, enlarged, reduced, and translated. There are assistant prompts during the use of the software, the contents are as follows: A. Wet alarm system 1. System overview: Overview of wet alarm system 2. Equipment recognition: It is equipped with the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), exercises (built-in 6 multiple-choice questions, with prompts for correct and wrong choices), and schematic diagrams (you can enter the equipment from the schematic diagram). The equipment includes: sprinklers, water flow indicators, signal butterfly valves, exhaust valves, fire alarm controls, high-pressure gauges, high-level water tanks, Wia control cabinets, pressure-stabilizing tanks, flow switches, terminal water testing devices, dr*nage facilities, water pump connectors, hydraulic alarms, time delays, wet alarms, butterfly valves, check valves, fire pumps, safety pressure-stabilizing valves, and fire water tanks. 3. Principle display: Display the working principle of the wet alarm system, 3D animation demonstration, and semi-transparent 3D models, so that the internal water flow can be seen. Equipped with practice module (built-in 4 multiple-choice questions, with prompts for correct and wrong choices) 4. Design layout: There are multiple-choice questions and calculation questions, each of which is scored, and the correct answer and score will be displayed after submission B. Gas fire extinguishing system 1. System overview: Overview of gas fire extinguishing system 2. Equipment cognition: It is equipped with the best viewing angle, equipment det*ls (displaying the introduction or parameters of the equipment), practice (built-in 8 multiple-choice questions, with prompts for correct and wrong choices), schematic diagram (you can enter the equipment from the schematic diagram). The equipment includes: nozzle, HFC-227 storage bottle, bottle head valve, heptafluoropropane check valve, high-pressure hose, gas check valve, safety valve, weighing alarm, electromagnetic starter, selection valve, smoke alarm, fire alarm controller. 3. Principle display: Display the working principle of the gas fire extinguishing system, 3D animation demonstration, 3D model is semi-transparent, and the internal gas can be seen. Equipped with practice module (built-in 3 multiple-choice questions, with prompts for correct and wrong choices) 4. Design layout: There are 6 multiple-choice questions, each with scores, and the correct answer and score will be displayed after submission C. Escape drill: Teaching in the form of fun games, escaping from the burning room within a limited time, and wrong choices will directly enter the score interface M*n configuration: water pump, flow meter, experimental water tank, water storage tank, metering water tank, jet dynamometer, nozzle, scale ruler, stopwatch, experimental pipeline, valve, self-circulation device, st*nless steel frame.
欢迎咨询ylHGLT-22 Momentum Law Training Device相关问题,我们是源头工厂，有标准工业厂房生产基地，欢迎前来考察，如有ylHGLT-22 Momentum Law Training Device其他问题，可联系19957812178
